Produse pentru mic 5 amp canal (18)

Il mondo futuro di automazione presenta le sfide quali rete, la velocità, l'accuratezza, l'integrazione e la convenienza. CARATTERISTICHE — Pronto ad usare con c'è ne faccia del sensore per i vostri bisogni di misura, indipendente del produttore — Configurazione ultraveloce del pulsante — Riconoscimento automatico del sensore dovuto lo spaccapietre TEDS — Interfaccia estensibile di fieldbus via il regolatore del bus — Ethernet di sostegni ha basato i fieldbuses come PROFINET, EtherCAT, interfaccia dell'ingresso/uscita di EtherNet/IP oder — Esportazione sincrona di fino a 8 canali di misura via il regolatore del bus — Funzione completa dell'esportazione di misura-dati — Adatto a misure della forza, di pressione, di spostamento, di velocità di rotazione e di coppia di torsione, compreso le misure combinate — Tari la funzione tramite pulsante o i segnali dell'ingresso/uscita per ogni amplificatore 9250 Tipo:di segnale Funzione secondaria:di misura Altre caratteristiche:fieldbus, per pressione, multicanale,

1-Kanaliger Messverstärker Einstellbarer Schaltpunkt über Poti Anwendung Das DMS-Messverstärker Modul AT065 wird verwendet, um das Signal einer DMS-Messbrücke zu erfassen und aktuelle Werte und Zustandsinformationen für die weitere Verarbeitung auf der Automatisierungsebene bereitzustellen. DMS-Sensoren liefern ein der Krafteinwirkung proportionales Signal, welches vom Messverstärker erfasst und als Analogsignal (einstellbar 0/4..20mA oder 0..10V) zur Verfügung gestellt wird. Zusätzlich verfügt das Modul über einen einstellbaren Schaltpunkt, welcher über ein Poti eingestellt werden kann. Der Zustand des Relaiskontaktes wird durch die LED an der Frontplatte des Moduls angezeigt. Das Modul ist für den Einsatz im Schaltschrank und für die Montage auf Hutschiene konzipiert und wird mit einer Versorgungsspannung von 230VDC betrieben.

4-channel universal amplifier Scanning rate 20 kHz with 24 bit Supports more than 12 sensor types Ethernet, CAN

The µCAN.4.sg-BOX is a decentralized measurement data acquisition module for the acquisition of four strain gauges or resistance bridges. The resistance bridge data is acquired at a total sampling rate of 400 Hz. Strain gauge full- / half- / quarter bridge:Voltage +/- 60 mV Supply voltage 4.096 V:Accuracy 0.01 % (FS) Resolution up to 24-bit (1 µV):Sampling rate 5ms / 200 Hz Fieldbus CAN:Protocol CANopen / Raw CAN

24VDC / 5VDC 10A

DC/DC Gleichspannungswandler - 19" Modul

We offer a range of 7-Segment-Modules (Digital-Modules) with integrated driver IC. Some of these products are ready for use as a full operating voltmeter. You can also use these products for different purposes as a "Multirange Measurement Instrument". Some applications for example are: voltage measurement, current measurement, resistance measurement, AC-voltage measurement, temperature measurement and more. Please refer to the technical information. Most of our products are available from stock. If you do not find any product which can fit into your application we have the possibility to make customized- or semicustomized designs also at low volumes and an economical price level. Most of our products are available from stock. If you do not find any product which can fit into your application we have the possibility to make customized- or semicustomized designs also at low volumes and an economical price level.

ACTR8027 is SMD SAW Resonator with 868MHz centre frequency, tolerance: ±150kHz, insertion loss 1.8dB, Temperature range from -40 to 85°C, 6 Pad.

Gleichspannungswandler Typ 412-3.3 || Eingangsspannungsbereich von 9V bis 36V | Ausgangsspannung: 3.3V | Ausgangsleistung: 9W | Für Umgebungstemperaturen bis +75°C | Kein Leistungsderating

Measuring Frequency with PPC-CAN-FR The PPC-CAN-FR can be used to connect frequency signals (e.g. from turbines, flow counters or tachometers) to the PPC-Pad or PPC-04-plus-CAN. The instruments can process sinus and rectangle signals from 1 Hz to 5 KHz with signal amplitude from 20 mV to 10 V. Configuration is possible via USB and PC software. Power Supply for External Sensors An external sensor can be supplied with 24 V using the PPC-CAN-FR. Analogue or CAN Output The PPC-CAN-FR can be connected either to an analogue input or CAN input.

El mundo futuro de la automatización presenta desafíos tales como establecimiento de una red, velocidad, exactitud, integración y rentabilidad. CARACTERÍSTICAS — Listo para utilizar con ningunos haga del sensor para sus necesidades de la medida, independiente del fabricante — Configuración ultrarrápida del botón — Reconocimiento automático del sensor debido al separador TEDS — Interfaz extensible del fieldbus vía el regulador del autobús — Ethernet de las ayudas basó fieldbuses como PROFINET, EtherCAT, interfaz de la entrada-salida de EtherNet/IP oder — Exportación síncrona de hasta 8 canales de la medida vía el regulador del autobús — La instalación completa de la exportación de los medida-datos — Conveniente para la fuerza, la presión, la dislocación, la velocidad rotatoria y las medidas del esfuerzo de torsión, incluyendo medidas combinadas — Destare la instalación vía el botón o las señales de la entrada-salida para cada amplificador 9250 Tipo:de señal Función secundaria:de medidas Otras características:fieldbus, para galga extensométrica, Otras características:para celda de carga, para presión, Otras características:multivías, 8 canales

The µCAN.4.ti-BOX features 4 inputs for measuring temperature sensors such as RTD and thermocouples with 400 Hz total sampling rate. The CAN interface supports the protocols CANopen and J1939.Temperature Thermo type J, K, N, R, T Temperature Thermo type J, K, N, R, T:Temperature Pt100, Pt200 (2- / 4-wire) Temperature Pt500, Pt1000 (2- / 4-wire):Accuracy +/- 0.1 K Resolution 16-bit (0.1 °C):Sampling rate 10 ms / 400 Hz Fieldbus CAN:Protocol CANopen / Raw CAN

The µCAN.4.ai-F1 is the versatile universal measuring module for analogue standard signals. The module is designed to measure +/- 40 V or -20…+20 mA signals at an overall sampling rate of 4 kHz. Strain gauge full bridge:Voltage +/- 60 mV Supply voltage 4.096 V:Accuracy 0.01 % (FS) Resolution 24-bit (0.01 µV):Sampling rate 1.25 ms / 800 Hz Parameterized via set-up software:Casing powder coated Fieldbus CAN:Protocol Raw CAN

The decentralized module µCAN.4.ao-BOX features four analogue outputs which optionally provide a voltage signal (+/- 10 V) or a current signal (0…20 mA). The CAN interface supports the protocols protocols CANopen and J1939. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz:Signal type freely configurable Fieldbus CAN:Protocol CANopen / Raw CAN / J1939

DC/DC Gleichspannungswandler - 19" Modul

The µCAN.4.ci-BOX is equipped with 4 fast counters of up to 100 kHz. The CAN module acquires and processes the binary pulses and transmits them to a higher-level system. Counter input / frequency measurement:A/B signal Max. input frequency 500 kHz:High precision frequency measurement Signal type freely configurable:Up or down counter Fieldbus CAN:Protocol CANopen / Raw CAN

AC / DC 0 – 25V / 10A; 6V / 5A

Gleichspannungswandler-344-24-SD || Eingangsspannungsbereich von 22V bis 160V | Ausgangsspannung: 24V | Ausgangsleistung: 50W | Für Umgebungstemperaturen bis +85°C | Kein Leistungsderating